Butt Weld Fittings

View available steel grades

Concentric Reducer & Eccentric Reducer

 

 

Eccentric Reducer

  • Process: Cold & Mandrel Forming
  • Seamless/Welded Type: 1/2” to 102”
  • Standards: ASME/ANSI B16.9, B16.28; MSS SP -43; DIN2605; DIN 2615; DIN2616; B.S 1640
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Material: Carbon steel, Stainless steel, Alloy Steel.

Concentric Reducer

  • Process: Cold & Mandrel Forming
  • Seamless/Welded Type: 1/2” to 102”
  • Standards: ASME/ANSI B16.9, B16.28; MSS SP -43; DIN2605; DIN 2615; DIN2616; B.S 1640
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Material: Carbon steel, Stainless steel, Alloy Steel.

 

View Reducer Dimensions Table

Reducing Tee & Equal Tee

 

 

 

Reducing Tee

  • Seamless/Welded Type: 1/2" to 102"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

Equal Tee

  • Seamless/Welded Type: 1/2" to 102"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

 

View Tee Dimensions Table

Elbow 45° 90° 180°

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 1/2" to 102"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

 

View Elbow Dimensions Table

Cap

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 1/2" to 102"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

 

Induction Bend 2,5D / 3D / 4D / 5D / 10D

 

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 2" to 56" (60.3mm to 1420mm)
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Thickness: from 4mm to 85mm
  • Materials: Carbon steel, Stainless steel, Alloy Steel.
  • Bending Radius: from 210mm to 10800mm
  • Bending Angle:from 5° to 180°

     

Reducing Elbow

 

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Welded Type: 6" to 40"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

Barrod Tee

 

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 4" to 24"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

Y Piece

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Welded Type: 6" to 102"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

Long Tangent Elbow

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 2" to 56" (60.3mm to 1420mm)
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Thickness: from 4mm to 85mm
  • Materials: Carbon steel, Stainless steel, Alloy Steel.
  • Bending Radius: from 210mm to 10800mm
  • Bending Angle:from 5° to 180°

     

Special Crosses

  • Process: Cold Extrusion & Hot Extrusion Forming
  • Seamless/Welded Type: 2" to 40"
  • Standards: ASME/ANSI B16.9,B16.28; MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616:
  • Schedules: STD, XS, XXS, SCH10, SCH20, SCH30, SCH40, SCH60, SCH80, SCH100, SCH120, SCH140, SCH160
  • Materials: Carbon steel, Stainless steel, Alloy Steel.

Special Fittings acording to customer drawing

.